Are you tired of seeing the water droplets, grease, curry splashes, soap sediments and dirt in your kitchen and bathroom tiles? Well, backsplash tiling is the best solution for this problem of yours. Tiling a backsplash above the kitchen counter or bathroom walls is one of the easiest ways to upgrade an old, tired kitchen in the most cost-effective manner. Making a big splash with colour, shape, size, texture, installation pattern, or all of them together is Back-splash!

Its amazing functionality is the most important benefit of a back-splash. So, you can plan to back-splash your walls over the coming weekend. Don’t worry, we have got you covered with an all-encompassed guide where you can do a job as great as any tiling services guy.

Let us first begin with the raw materials and the tools required for the process.

Required Tools
Required Raw Materials
  • 4-in-1 screwdriver
  • Bucket
  • Caulk gun
  • Drill/driver – cordless
  • Grout float
  • Level
  • Non-contact voltage tester
  • Notched trowel
  • Rubber mallet
  • Self-centring drill bit
  • Tape measure
  • Utility knife
  • Caulk
  • Grout
  • Grout sealer
  • Mastic
  • Outlet extenders
  • Stone tile sealer
  • Tile
  • Tile spacers

In this backsplash tiling guide, we will cover the installation of mosaic tiles as it is easy to install by cutting the backing mesh behind the sheets to suit your space in the kitchen or bathroom. These are easily available with almost all the tilers in Sydney.

Installation Steps to Follow for Backsplash Tiling

Step 1

Prepare the wall to be back-splash, clean it and keep it out of moisture.

Step 2

Mark a centre line between the upper ceiling wall or cabinets if installed, to ensure the tiles are neatly placed. 

Step 3

Beginning from the centre line marked, spread a thin layer of mastic adhesive on the wall. Make sure to apply adhesive only to 2 -4 sheets holding width at a time so the adhesive doesn’t dry before you set the tile.

Step 4

With the help of wood scrap, tap the tile into the mastic holding a rubber mallet. Check if any of the tiles are crooked, if so correct them accordingly. In between the sheets of tiles, eyeball a 1/16-inches joint. Keep tapping the tile sheets into the mastic with a board and rubber mallet after every two or three are installed sheets.

Step 5

To fit the tiles around the outlets, cut the sheets to the nearest full row and then fill the gaps with tiles cut on a wet saw.

Step 6

With the help of a float, force grout into the joints and by moving the float diagonally, scrape off the excess grout.

Step 7

With a utility knife, rake the grout out of the joints at inside corners and along the bottom so you can fill them with caulk with the dull side of the blade being alongside the countertop.

Sponge on a grout sealer, after seven days, to protect the grout against stains.

And, you are done! Now you need not worry about the splashes anymore every time your family and friends gather in your kitchen. Although it is advisable to check out for the best tiling services in Sydney for perfect work.


Your email address will not be published. Required fields are marked *