Blog
How to tile a bathroom wall | Precious Tiling

Tiling a bathroom becomes a tough job for many. Are you amongst them? Well, you won’t be anymore. As we would explain it to you very clearly step by step, as to how you can master bathroom wall and kitchen tiling

It matters not whether you have tiling experience or not as through this guide any amateur can do a great job with perfect planning and timely execution. So, let’s begin with first understanding the types of tiles that could be used for flooring and the walls. 

What Kind of Tiles Do I Use?

Well, the first and the primary rule is to understand that the size here plays the main game, i.e. a small bathroom with large tiles or large bathrooms with small tiles will spoil the whole scene for you. So keep your measurements right before selecting the tile type.

Listed below are the type of tiles used for bathrooms. You can check out our previous article on ‘ 8 Top Materials for Bathroom Tiles’ to know which tile type would suit your bathroom the best. 

  1. Metal Tile
  2. Ceramic Tiles
  3. Terracotta Tiles
  4. Porcelain Tiles
  5. Glass Tiles 
  6. Natural Stone Tiles
  7. Marble Tiles
  8. Cement Tiles

Now that we have understood the various types of tiles used, let us dive into the actual procedure of actual tiling and later the process for grouting tiles as well.

Step 1. Cleaning the Surface and Prepping 

Like any other job, firstly you will need to ensure that the bathroom floor and wall are clean and clear. This is a prime step as this will give you a smooth and fresh surface to work on, which is necessary for proper tiling.

Step 2. Gauge Stick 

Are you aware of a gauge stick? Well, it is nothing but a wooden stick which is used to mark the size of your tiles and doing it yourself is the most cost-efficient way. It is just like taking a scale and checking the measurement of the tile, here instead of just checking you will have to mark it on the stick and also leave room for the tile spacer. 

Bathroom Wall Tiling | Precious TilingStep 3. Application of Tile Backer Board

You would need a sturdy and firm wall before grouting bathroom tiles and thus a tile backer board is one of the best ways to do so. 

Step 4. Mapping Guidelines

The key here is to find the centre point of the tile by measuring the width and height of the tile as this will ensure all the tiles are rightly and symmetrically placed. Now, is when your previously created gauge stick will come in handy and act as a map as you start placing the tiles. 

Step 5. Tile Laying 

Working upwards is always the best and the easiest way to lay the tiles. Simply pick up your chosen tile and place it on the wall, now add the tile spacer adjacent to the placed tile to ensure there is enough space where the adhesive can set in and keep your tiles intact and stuck to the wall. 

Step 6. Mixing and Applying Waterproofed Adhesive

Adhesive, they are the vitals of the whole bathroom tiling procedure as being a place always filled with water having a proper adhesive that is completely waterproof is important. These days the tile adhesive comes with a waterproofing agent in them already so you need just to mix them and apply the adhesive using a notched trowel for even spread of the adhesive all across the wall and floor. 

Step 7. Adding the Wall Trims in case of External Corners

Wall trims are used to cover the external corner of the wall and application of them is not at all tough, and a cakewalk after which it will leave your bathroom looking ultimately professional and of high quality as well.

Step 8. Mixing the Grout

The key to nail bathroom tiling is grouted wall or floor. Yes, as dampness would ruin your entire efforts of tiling if waterproofing is not done right. Thus mixing and applying the grout perfectly becomes too important a step. 

Now here again a tip is to take it slow, as you would have already applied adhesive, you will have to wait till it dries completely before grouting tiles. Once the adhesive is dried up, you just need to mix the grout in the same way you do for mixing a plaster by putting it in a clean bucket which is dry and then add water little by little as per the requirement to have a smooth consistency mix. 

Step 9. Application of the Grout

The last step of the tiling is to apply the grout using a trowel and sponge. Ensure all the tiles, exposed gaps are covered efficiently. This would be the best way to grout tiles. Wipe off the excess grout from the tiles using a clean sponge. 

Well, that’s it guys, you are done with the tiling all by yourself. Although we would suggest that you hire a professional to get this job done. You can visit https://precioustiling.com.au to get a reasonable quote for your tiling requirement.

 

LEAVE A COMMENT

Your email address will not be published. Required fields are marked *